High efficienccy reliable 2t capacity 63m per minute speed
Construction material hoist
- The cage is made of high strength steel, will not brake under
strong struckCapacity range from 1000kg to 2700kg per cage
- The max height can reach 350 meter height.Standard cage dimention
is (L3.2m *W1.5m *H2.5m), also can designed according to
requirements .The transmission part is consist of 3*15kw motors
with magnetic brakes and efficient gearbox.Variable speed with the
VFC control system, small start current, more smoothly, also
protect the electrical components.
- The speed can be adjusted from 0 to 63 m/minhe mast section is made
of 4.5mm thickness steel pipe, 6mm thickness for height over 120m
- The Starting and braking are smooth with no impact.
- Lifting speed can be easily controlled .
- Starting current is lower than the rating current .
- The mechanical wear of gear and rack can be reduced greatly because
of no impact at starting, especially the reducing of wear of
brake.The mechanical wear can be reduced effectively.
|Rated capacity/per cage||2000kg|
|Invertor Power||45 kw|
|Mast section size||0.65*0.65*1.508m|
|Max. Installation height||350m|
|Cable type||Cable trolley|
- Safety device. Will act when the cage exceed the set speed. Also
called anti-falling device.
- Upper and lower limit switches, when touch the contacter attached
on the mast. The power will be shut down before the cage crash the
bottom or running out of the top.
- To shut down the power if the doors are not closed properly.Cabin
door mechanical and electrical interlocks .
- Overload protector- The weight of the loading will show on the
indicator, preventing overloading
- Audible warning. Before movement, press the warning bottoms
- Safety hooks protecting cage running of the mast.
- Buffers at the base to protect the cages
- Cable trolley or cable drum and cable guide (preventing wind) to
protect the power cable.